2018 Honda Pilot: Vtec Engagement Point Explained Youtube

Author Dalbo 21 May 2026

The vtec on this vehicle is used for switching intake valve lift between low lift and high lift, depending on engine speed and vehicle speed; it uses a variable cylinder management (vcm) system that switches. By altering the settings, he can prevent premature engagement. It balances the performance with eﬃciency by how the engine funcon depending on the driving condions.

How To Put Honda Pilot In 4-Wheel Drive? (Engage 4WD)

2018 Honda Pilot: Vtec Engagement Point Explained Youtube

The vtec crossover point is the engine speed (rpm) at which the ecu energizes the vtec solenoid It does not replace the ecu, but works in conjunction, enabling the driver to adjust both the fuel curve and the various vtec engagement points This action engages the hydraulic pin mechanism, transitioning the valvetrain from the low.

Vtec engagement occurs at 5,350 rpm, which allows the engine to take full advantage of the vtec system and produce maximum power and torque

Overall, the honda j35y6 engine is a. Set the vtec point to the intersection of the high speed cam and the low speed cam Generally if there is a sudden increase in engine output immediately after the cams switch then lower vtec [5] based on sae j1100 cargo volume measurement standard plus floor space between first and second seats and front seats moved forward

[6] based on 2018 epa mileage ratings This tab contains parameters for setting the vtec point & window For jdm engines and jdm ecus disable the vtec oil pressure.